DRIVING CUSTOMERS TO YOU - AUTO AS ADVERTISING AND MARKETING VEHICLE

Driving Customers To You - Auto As Advertising And Marketing Vehicle

Driving Customers To You - Auto As Advertising And Marketing Vehicle

Blog Article

A. Make sure the equipment used to repair your windshield is of professional quality and not a $9.00 do it yourself kit and some kid claiming high quality repairs. Quality windshield repair kits cost a thousand dollars or more. Make sure the technician doing the repairs has the skills needed and has at least one year experience in-house under supervision. The windshield repair industry requires 80% visual improvement. Most repair specialists strive for 95% plus visual improvement. The reason for this is that once a repair is attempted and not done properly the first time your stuck with that repair, as you can't do it over again! I have seen repairs where a drop of glue placed over the break, cured and called good. Someone paid for that repair that will likely fail and crack-out.

Even if you do have to get the entire windshield replaced, you could still get off the hook if your insurance company will cover it. Free chip front window repair is included in a lot of policies, so check this out. Just remember that insurance providers often have stipulations about which glass company you are allowed to go with, and therefore you will probably have to use a company they suggest.



You will next see what is called a parting bead which is a small trim piece about 1/2 inch by 3/4 inch in size partially buried in the window casing. It separates the two sashes. I recommend replacing these and you will find they are very difficult to remove without splintering them. If you are repairing the window and not installing new side tracks you must replace the parting beads. The upper sash and weight removal is the same as the bottom. Don't forget to open the sash pockets at the bottom of the upper sash tracks as well to allow sash weight removals. With sash, weights, nails and pulleys removed, clean all loose paint from remaining surfaces and if your sure it is not lead paint, some sanding may be in order as well.

Determining the ARV is a fairly simple process and definitely the most important. This is where you should spend most of your thinking time and efforts. One of the easiest ways to do this is to get a CMA or comparative market analysis or "comps" from your realtor. When a realtor gives you comps they show you notice I didn't say tell you what price other houses that are similar to the one you are looking at have windshield replacement sold for in the past months.

This is another biggie. One way to overcome this stumbling block is to take a contractor with you when you inspect the house. If you do this on a few houses, you will become very efficient at estimating the cost to windshield chip repair many items such as putting on a new roof, installing siding, and replacing windows and doors. You will also become familiar with costs for painting, landscaping, clean outs, new furnaces and kitchen and bath updates.

The first step that you need to do in repairing your windshield is to clean the damage area of the glass. In running cracks or chip, there are tiny pieces of glass which you need to pick out using razor blade. These loose pieces of glass inside the damaged area could throw off the repair process. That's why they need to be carefully picked out. Then, you also need to clean section of the glass where you will place the suction cup tool; you could use the glass cleaner to properly clean the surface.

Repairing a windshield has several benefits opposed to complete replacement. Repair is always going to be less expensive. Repairing a chip or crack also doesn't damage the watertight seal created in the factory windshield, replacing the windshield will require this seal to be broken. Secondary windshields tend to leak over time. Repairing a windshield is also much better for the environment since your windshield won't end up in a landfill somewhere.

Report this page